North American Report

Brief Introduction About General Inspection Service And Benefits

 Breaking News
  • No posts were found

Brief Introduction About General Inspection Service And Benefits

February 24
12:34 2021
Brief Introduction About General Inspection Service And Benefits

Product inspection is divided into pre-production inspection, during production inspection and pre-shipment inspection.

Pre-Production Inspection

Pre-production inspection is to be conducted at the beginning of production or even before the start of manufacturing.

Duties

Check the raw materials and components used in production;
Select samples of semi-finished products to detect potential defects;
Evaluate the quality system of the production line;
Assess the management and ability of production equipments;
Assess the production capacity of the manufacturer;
Provide technical advice to the factory to improve product quality and minimize defects;
Assess production schedule.

Benefits 

Find existent and potential problems before mass production to avoid unnecessary loss. Ensure consistence of product specification and production schedule

During Production Inspection

During-production inspection is to be conducted when 10%-15% of the production is completed.

Duties

Evaluate products for safety, performance, design, function and appearance;
Check for any defects and deviation from clients’ specifications and/or given samples;
Evaluate the packing methods and packing material;
Check and evaluate the quality management of production line;
Evaluate the production progress against the schedule and predict if the shipment is on schedule;
Give practical and effective advices to improve quality in accordance of the findings.

Benefits

It is suitable for control of the production quality during the mass production. Ensure that the progress, production cycle and the quality meet clients’ requirements through as early as possible discovering and processing the quality problems.

Pre-Shipment Inspection

Pre-shipment inspection takes place when the merchandise is finished, packed and ready for shipment. Sampling is implemented in accordance with the internationally recognized acceptance sampling standards, e.g. ISO2859/ANSI/ASQCZ1.4 /BS6001/DIN40080/NFX06-022, etc.

Duties

Check quantity, accessories, assortment, labeling, shipping mark, etc. against the purchase order, given samples and technical documents;
Evaluate product for safety, design, function, appearance, and performance;
Check for any defects and deviation against the technical standards or requirements;
Assess packaging form.

Media Contact
Company Name: General Inspection Service Co., Ltd
Email: Send Email
Phone: +86-591-87562601
Country: China
Website: https://www.gis-inspection.com/